When you would like to secure affordable procurement options for West Coast Aerospace Inc part number WC1170V4-2A, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on West Coast Aerospace Inc part number WC1170V4-2A for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-9469 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014819469 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11825V4-2A | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| CQBC | Minimum Tensile Strength | 3200 POUNDS PER SQUARE INCH |
| AASK | Head Style | FLAT COUNTERSUNK |
| FEAT | Special Features | 95 KSI SHEAR STRENGTH |
| ABQZ | Internal Drive Style | TORX |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
| AASB | Fastener Length | 0.550 INCHES NOMINAL |
| AHYM | Nominal Thread Diameter | 0.250 INCHES |
| CMLP | Thread Quantity Per Inch | 28 |
| MATT | Material | TITANIUM OVERALL |
| AASL | Head Diameter | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| AASA | Thread Length | 0.425 INCHES NOMINAL |
| AAVA | Point Diameter | 0.425 INCHES NOMINAL |
| AAJF | Thread Direction | RIGHT-HAND |
| ANEE | Grip Length | 0.125 INCHES NOMINAL |
| ABQJ | Point Style | FLAT |
| THSD | Thread Series Designator | UNJF |
| MRC | Decoded Requirement | Clear Text Reply |
| AAUJ | Spline Major Diameter | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AGAV | End Item Identification | F/A-18E, F/A-18F |
| AAJD | Thread Class | 3A |
| CRTL | Criticality Code Justification | AGAV |
| AAUR | Grip Diameter | 0.249 INCHES NOMINAL |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote