Obtain a Quote for Wabco Construction And Mining Part Number 429973 Now

Part Number:  429973
NIIN:  00-354-9103
Item Name :  shaft axle automoti
CAGE Code:  00447
INC Code :  10852
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Wabco Construction And Mining part number 429973, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Wabco Construction And Mining part number 429973 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 429973

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 429973 with NSN 2520-00-354-9103, 2520003549103

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2520-00-354-9103

Item PartTypeName:

SHAFT,AXLE,AUTOMOTIVE

25200035491030P
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
429973295

Characteristics Data of NSN 2520-00-354-9103, 2520003549103

MRCCriteriaCharacteristic
AAZQHOLE DEPTH1.9375 INCHES NOMINAL
ABHPOVERALL LENGTH26.953 INCHES NOMINAL
AETCMETALLIC HARDNESS RATING40.4 MINIMUM ROCKWELL C AND 44.5 MAXIMUM ROCKWELL C
AJYTHOLE SCREW THREAD SERIES DESIGNATORNF OR UNF
AKAGHOLE THREAD DIRECTIONRIGHT-HAND
AMDMFIRST END SPLINE LENGTH3.490 INCHES MINIMUM AND 3.510 INCHES MAXIMUM
AMDNFIRST END SPLINE MINOR DIAMETER3.070 INCHES MINIMUM AND 3.080 INCHES MAXIMUM
AMDPFIRST END SPLINE MAJOR DIAMETER3.495 INCHES MINIMUM AND 3.497 INCHES MAXIMUM
AMGASECOND END SPLINE LENGTH4.3125 INCHES NOMINAL
AMGBSECOND END SPLINE MINOR DIAMETER3.116 INCHES MINIMUM AND 3.122 INCHES MAXIMUM
AMGCSECOND END SPLINE MAJOR DIAMETER3.488 INCHES MINIMUM AND 3.490 INCHES MAXIMUM
AMHLSECOND END BEARING SEAT DIAMETER3.5435 INCHES MINIMUM AND 3.5445 INCHES MAXIMUM
AMHMSECOND END DISTANCE FROM BEARING SEAT TO END4.3125 INCHES NOMINAL
AMQAFIRST END TYPESPLINED
AMQFSECOND END TYPESPLINED
ASXKHOLE QUANTITY3
BBCDFIRST END SPLINE QUANTITY16
BBCFSECOND END SPLINE QUANTITY10
BDFLHOLE THREAD SIZE5/8-18
BNPKSECOND END FACILITY DIAMETER3.875 INCHES NOMINAL
BNTFFIRST END BEARING SEATNOT INCLUDED
BNTMSECOND END SPLINE TYPESTRAIGHT
BNTQSECOND END ENGAGING/LOCKING/POSITIONING FACILITYSHOULDER
BNTRSECOND END FACILITY WIDTH0.250 INCHES NOMINAL
BNTSSECOND END FACILITY LOCATIONLOCATED 5.4375 IN. FROM SHAFT END
BNTTSECOND END BEARING SEATINCLUDED
BNTWSECOND END BEARING SEAT WIDTH1.1094 INCHES MINIMUM AND 1.1250 INCHES MAXIMUM
BNTXEND HOLE TYPETHREADED
BNYXFIRST END SPLINE TYPESTRAIGHT
MATTMATERIALSTEEL

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top