When you would like to secure affordable procurement options for Veyance Technologies Inc part number 12SW12MS12FJS25, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Veyance Technologies Inc part number 12SW12MS12FJS25 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-852-3810 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 008523810 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 12SW12FJS25 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQRB | SEAT ANGLE | 30.0 DEGREES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 600.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | OIL RESISTANT AND WEATHERPROOF |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 2B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.750 INCHES NOMINAL |
| ABKV | OUTSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ADLF | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLG | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLH | UNABLE TO DECODE | UNABLE TO DECODE |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| ABJH | TEMP RATING | 40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 5.000 INCHES |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM AND COMPLETE FITTING ZINC 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 14 2ND END |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQBD | BURST TEST PRESSURE | 1200.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER,SYNTHETIC OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CQGM | MAXIMUM OPERATING PRESSURE | 300.0 POUNDS PER SQUARE INCH |
| CQHW | UNABLE TO DECODE | UNABLE TO DECODE OR UNABLE TO DECODE |
| CQJX | NOMINAL THREAD SIZE | 0.750 INCHES 2ND END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CRLL | UNABLE TO DECODE | UNABLE TO DECODE OR UNABLE TO DECODE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 25.000 INCHES NOMINAL OVERALL |
| CRZY | UNABLE TO DECODE | UNABLE TO DECODE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,SYNTHETIC |
| THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
