When you would like to secure affordable procurement options for Univex Corporation part number 1012311, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Univex Corporation part number 1012311 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3020-01-398-5720 Item PartTypeName: GEAR,BEVEL | 3020 | 013985720 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1012311 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | Material | STEEL COMP 4140 OVERALL |
| CWCD | Nominal Outside Diameter | 3.746 INCHES |
| CQFM | Hardness Rating | 48.0 ROCKWELL C MINIMUM OVERALL AND 52.0 ROCKWELL C MAXIMUM OVERALL |
| MRC | Decoded Requirement | Clear Text Reply |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 1.058 INCHES SECOND END |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| CWWK | Precision Classification | ACCURACY GRADE 8 |
| CWTR | Hub Style Designator | PINNED SECOND END |
| ABSX | Attachment Method | MOUNTING HOLE |
| AJLA | Teeth Quantity | 37 |
| ANTP | Bore Style | PLAIN BOTH ENDS |
| CWMW | Teeth Type | STRAIGHT |
| CWRS | Bore Nominal Diameter | 0.788 INCHES BOTH ENDS |
| CTQY | Mounting Hole Type And Quantity | 1 PLAIN TRANSVERSELY THROUGH HUB, SECOND END |
| CWQD | Pitch Angle | 19.7783 DEGREES |
| CWTX | Hub Nominal Diameter | 1.500 INCHES SECOND END |
| FEAT | Special Features | USED IN VERTICAL SHAFT ASSEMBLY, UNIVEX MIXING MACHINE M12C |
| CWFR | Nominal Overall Length | 1.261 INCHES |
| CWRM | Face Nominal Width | 0.600 INCHES |
| CWZK | Mounting Hole Nominal Diameter | 0.312 INCHES TRANSVERSELY THROUGH HUB, SECOND END |
| AAQL | Body Style | PLAIN, SOLID |
| AGJS | Pitch Diameter | 3.7000 INCHES NOMINAL |
| STYL | Style Designator | PERIPHERAL FACE, BACK HUB PROTRUDING |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote