You have reached the Request for Quote (RFQ) page for part number SPB-12-CR, an item sourced from Thomson Industries Inc (CAGE Code 96881) that is classified with the item name Bearing Unit Ball. Here, you can utilize our online form to quickly secure tailored pricing and procurement options from our staff as the first step of procurement. With responses always being quick, be sure to get started as soon as possible if you would like to learn more about this part number.
The part number SPB-12-CR is associated with Thomson Industries Inc, identified by the CAGE Code 96881, and is typically referenced under the item name Bearing Unit Ball. It is categorized under the NSN 3130-01-310-2409, with the NIIN 013102409, INC 30556, and NCB code 01 (USA). Additionally, this part falls under the Federal Supply Group (FSG) 31 and Federal Supply Class (FSC) 3130 Bearings Mounted. For more information, these classifications provide further context about the component.
With the form provided, be sure to present our staff with key details on your needs, such as your target pricing, required quantity, and expected turnaround time. Once we receive and review your request for part SPB-12-CR, a member of our staff will contact you in 15 minutes or less to present customized solutions for your comparisons. Once you make a purchase with us, you can expect our staff to work closely with you through each step of fulfillment to ensure that all needs are met with care and efficiency.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-310-2409 Item PartTypeName: BEARING UNIT,BALL | 3130 | 013102409 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SPB-12-CR | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.1870 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.7495 INCHES MAXIMUM |
| ACYB | BASE THICKNESS | 0.3125 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 2.3650 INCHES MINIMUM AND 2.3850 INCHES MAXIMUM |
| AFWC | HOUSING HEIGHT | 1.7500 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 2.0625 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 2.7500 INCHES NOMINAL |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| MATT | MATERIAL | ALUMINUM ALLOY 6061 HOUSING |
| MATT | MATERIAL | STEEL CORROSION RESISTING BEARING |
| SFTT | SURFACE TREATMENT | CHROMIUM BEARING |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 1.2400 INCHES MINIMUM AND 1.2600 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | SELF LUBRICATED |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 0.9340 INCHES MINIMUM AND 0.9400 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| MATT | MATERIAL | STEEL CORROSION RESISTING SEAL |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
