Obtain a Quote for Technical Wire Products Llc Part Number 1A20422H01 Now

Part Number:  1A20422H01
Manufacturer:  Technical Wire Products Llc
NIIN:  01-319-2443
Item Name :  shielding gasket el
CAGE Code:  07700
INC Code :  20281
Country:  USA
NCB Code:  01

When you would like to secure affordable procurement options for Technical Wire Products Llc part number 1A20422H01, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Technical Wire Products Llc part number 1A20422H01 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 1A20422H01

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 1A20422H01 with NSN 5999-01-319-2443, 5999013192443

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5999-01-319-2443

Item PartTypeName:

SHIELDING GASKET,ELECTRONIC

59990131924430PA
CIICHCCESDPMICCriticalityENAC
UAS0
Part NumberISCRNVCRNCCHCCMSDSSADC
85099K-02058E

Characteristics Data of NSN 5999-01-319-2443, 5999013192443

MRCCriteriaCharacteristic
ADPWOUTSIDE CORNER RADIUS0.220 INCHES NOMINAL
AAUBHOLE DIAMETER0.146 INCHES MINIMUM AND 0.166 INCHES MAXIMUM
ABHPOVERALL LENGTH1.452 INCHES MINIMUM AND 1.482 INCHES MAXIMUM
ABMKOVERALL WIDTH1.452 INCHES MINIMUM AND 1.482 INCHES MAXIMUM
ADUYCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH1.146 INCHES MINIMUM AND 1.166 INCHES MAXIMUM
ADUZCENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.146 INCHES MINIMUM AND 1.166 INCHES MAXIMUM
AECSBOLT HOLE QUANTITY4
CTNJENVIRONMENTAL PROTECTION MATERIAL LOCATIONTHROUGHOUT RF SHIELDING GASKET
MATTMATERIALCOPPER EMI/RFI CONDUCTOR
MATTMATERIALSILICONE ENVIRONMENTAL SEAL
PRMTPRECIOUS MATERIALSILVER
SFTTSURFACE TREATMENTSILVER EMI/RFI CONDUCTOR
TESTTEST DATA DOCUMENT81349-MIL-G-83528 SPECIFICATION INCLUDES ENGINEERING TYPE BULLETINS,BROCHURES,ETC.,THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS,INDUSTRY DIRECTORIES,AND SIMILAR TRADE PUBLICATIONS,REFLECTI
ADVEOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.143 INCHES MINIMUM AND 0.168 INCHES MAXIMUM
ADVNCROSS-SECTIONAL HEIGHT0.027 INCHES MINIMUM AND 0.037 INCHES MAXIMUM
ZZZKSPECIFICATION/STANDARD DATA81349-MIL-G-83528/4 GOVERNMENT SPECIFICATION
AAGRCROSS-SECTIONAL SHAPE STYLEEMI
ABVLAPERTURE DIAMETER0.500 INCHES MINIMUM AND 0.520 INCHES MAXIMUM
ADVDOUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.143 INCHES MINIMUM AND 0.168 INCHES MAXIMUM
PMLCPRECIOUS MATERIAL AND LOCATIONEMI/RFI CONDUCTIVE PARTICLES SILVER
STYLSTYLE DESIGNATORNON-CIRCULAR

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top