When you would like to secure affordable procurement options for Smiths Tubular Systems Laconia Inc part number S39012-0300C, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Smiths Tubular Systems Laconia Inc part number S39012-0300C for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-577-8636 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 005778636 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G102GGG0300M | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJD | THREAD CLASS | 3B 2ND END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AAJP | UNABLE TO DECODE | UNABLE TO DECODE |
| AARX | INSIDE DIAMETER | 0.674 INCHES MINIMUM |
| ABJH | TEMP RATING | 65.0 DEG FAHRENHEIT AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.125 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.750 INCHES |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL CORROSION RESISTING ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING PASSIVATE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 2ND END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 12 2ND END |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 4TH LAYER SPIRALLY L |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 3RD LAYER SPIRALLY L |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 1ST LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE AND 3RD LAYER |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 2ND LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE 3RD LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE OUTER LAYER BRAIDED |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
| CQHW | UNABLE TO DECODE | UNABLE TO DECODE |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRDW | HYDROSTATIC TEST PRESSURE | 6000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRLL | UNABLE TO DECODE | UNABLE TO DECODE |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 30.000 INCHES NOMINAL WORKING |
| CRZY | UNABLE TO DECODE | UNABLE TO DECODE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC,POLYTETRAFLUOROETHYLENE; W/POLYEFINEXTERNAL SUPPORT |
| THSD | THREAD SERIES DESIGNATOR | UN 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UNJ 1ST END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
