Obtain a Quote for Sasco Inc Canadian Div Part Number 905591 Now

Part Number:  905591
Manufacturer:  Sasco Inc Canadian Div
NIIN:  00-626-6597
Item Name :  shaft axle automoti
CAGE Code:  58275
INC Code :  10852
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Sasco Inc Canadian Div part number 905591, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Sasco Inc Canadian Div part number 905591 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 905591

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 905591 with NSN 2520-00-626-6597, 2520006266597

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2520-00-626-6597

Item PartTypeName:

SHAFT,AXLE,AUTOMOTIVE

2520006266597P
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
809H89223

Characteristics Data of NSN 2520-00-626-6597, 2520006266597

MRCCriteriaCharacteristic
AAJFTHREAD DIRECTIONRIGHT-HAND
AAUBHOLE DIAMETER0.438 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
ABHPOVERALL LENGTH26.531 INCHES MINIMUM AND 26.656 INCHES MAXIMUM
ABUJTHREAD SIZE3/8-16
AETCMETALLIC HARDNESS RATING25.0 MINIMUM ROCKWELL C AND 60.0 MAXIMUM ROCKWELL C
AHTCFLANGE OUTSIDE DIAMETER4.745 INCHES MINIMUM AND 4.750 INCHES MAXIMUM
AJYPSCREW THREAD SERIES DESIGNATORUNC
AMGASECOND END SPLINE LENGTH1.350 INCHES MINIMUM AND 1.352 INCHES MAXIMUM
AMGBSECOND END SPLINE MINOR DIAMETER1.136 INCHES MINIMUM AND 1.141 INCHES MAXIMUM
AMQAFIRST END TYPEFLANGED
AMQFSECOND END TYPESPLINED
AXHRMOUNTING FACILITY TYPE AND QUANTITY2 THREADED HOLE AND 6 UNTHREADED HOLE
BBCFSECOND END SPLINE QUANTITY10
BNTFFIRST END BEARING SEATNOT INCLUDED
BNTMSECOND END SPLINE TYPESTRAIGHT
BNTQSECOND END ENGAGING/LOCKING/POSITIONING FACILITYLOCKING DEVICE GROOVE
BNTRSECOND END FACILITY WIDTH0.250 INCHES NOMINAL
BNTSSECOND END FACILITY LOCATIONLOCATED AT SHAFT END
BNTTSECOND END BEARING SEATNOT INCLUDED
BNYSFLANGE OVERALL THICKNESS0.812 INCHES NOMINAL
BNYTFLANGE THICKNESS AT MOUNTING HOLE0.438 INCHES NOMINAL
FEATSPECIAL FEATURES1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END
MATLUNABLE TO DECODEUNABLE TO DECODE OR UNABLE TO DECODE
MATTMATERIALSTEEL COMP 4063 OR STEEL COMP 1045
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-624,FS4063-CANCELED FED SPEC 1ST MATERIAL RESPONSE OR QQ-S-633,FS1045-CANCELED FED SPEC 2ND MATERIAL RESPONSE
ZZZVFSC APPLICATION DATACONTROLLED DIFFERENTIAL

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top