When you would like to secure affordable procurement options for Samarius Precision Instruments Inc part number 200C319, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Samarius Precision Instruments Inc part number 200C319 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-320-9881 Item PartTypeName: RESISTOR,VARIABLE,WIRE WOUND,PRE | 5905 | 003209881 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 200C319 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 3 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 1.3730 INCHES MINIMUM AND 1.3740 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0930 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.373 INCHES MINIMUM AND 1.374 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0930 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 2.188 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 3.375 INCHES NOMINAL |
| AECZ | MOUNTING LIP DIAMETER | 2.1870 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0930 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND |
| AEDZ | SHAFT BEARING TYPE | BEARING |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 320.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 6.00 INCH-OUNCES |
| AFJN | FRAGILITY FACTOR | MODERATELY DELICATE |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 15.0 KILOHMS 1ST SECTION AND 15.0 KILOHMS 2ND SECTION AND 10.0 KILOHMS 3RD SECTION |
| CQCH | TAP LOCATION FROM CCW TERMINAL PER SECTION IN DEG OF EFFECTIVE ELECTRICAL ROTATION | 60.0 3RD SECTION AND 91.5 3RD SECTION AND 132.0 3RD SECTION AND 145.0 3RD SECTION AND 172.0 3RD SECTION AND 240.0 3RD SECTION AND 307.0 3RD SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | 0.30 TO 0.30 1ST SECTION AND-0.20 TO 0.20 2ND SECTION AND-0.50 TO 0.50 3RD SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 2.0 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | ALL SECTIONS INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 7 3RD SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | 1.0 TO 1.0 DEG ANGULAR ROTATION 3RD SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | 1.0 TO 1.0 ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| TEST | TEST DATA DOCUMENT | 03848-93861 DRAWING THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWIN |
| TTQY | TERMINAL TYPE AND QUANTITY | 16 TURRET |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
