When you would like to secure affordable procurement options for Pettibone Inc part number 4C621467, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Pettibone Inc part number 4C621467 for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| BBBW | Mounting Provision Arrangement Style | TWO HOLE |
| ATEM | Extended Length | 95.875 INCHES NOMINAL |
| ABMK | Overall Width | 5.500 INCHES NOMINAL |
| ZZZV | Fsc Application Data | TRUCK,LIFT,FORK |
| ABDR | Mounting Provision | UNTHREADED MOUNTING HOLES |
| ABXV | Bore Diameter | 4.250 INCHES NOMINAL |
| ABJH | Temp Rating | 225.0 DEG FAHRENHEIT |
| ABJH | Temp Rating | -25.0 DEG FAHRENHEIT |
| AMQZ | Compressed Length | 61.375 INCHES NOMINAL |
| BGST | Pressure Rating | 2500.0 POUNDS PER SQUARE INCH MAXIMUM |
| CKSF | First Piston Rod End Style | FORK TYPE (CLEVIS) |
| CLML | Mounting Type And Location | TONGUE CYLINDER HEAD END |
| CLMS | Port Location And Quantity | 1 CYLINDER HEAD END |
| CLNB | Port Thread Class | 2B |
| ABKW | Overall Height | 7.000 INCHES NOMINAL |
| CKSD | Design Characteristics | DOUBLE ACTING SINGLE CYLINDER |
| CLMB | First End Largest Inside Diameter | UNABLE TO DECODE |
| CLMJ | First End Fork Span Width | 2.500 INCHES NOMINAL |
| CLMQ | Mounting Facility Diameter | 1.521 INCHES MINIMUM |
| CLMS | Port Location And Quantity | 1 PISTON ROD END |
| CLMT | Port Style | GASKET SEAL |
| CLMY | Port Thread Quantity Per Inch | 16 |
| CLMD | First End Fork Width | 3.000 INCHES NOMINAL |
| CLMG | First End Fork Depth | 14.250 INCHES NOMINAL |
| CLMQ | Mounting Facility Diameter | 1.541 INCHES MAXIMUM |
| CLMR | Center To Center Distance Between Mounting Provisions | 8.500 INCHES NOMINAL |
| CLMW | Port Thread Series Designator | UNF |
| CLMX | Port Thread Diameter | 0.750 INCHES NOMINAL |
| AMDX | First End Hole Diameter | UNABLE TO DECODE |
| FEAT | Special Features | PISTON ROD END HAS TWO HOLES ON 8.500 IN.CENTERS |
| AAFZ | Body Material | ANY ACCEPTABLE |
| MRC | Decoded Requirement | Clear Text Reply |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote