When you would like to secure affordable procurement options for Parker Hannifin Corp part number U3HU1212NJ12NJ90T52, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Parker Hannifin Corp part number U3HU1212NJ12NJ90T52 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-424-9102 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014249102 | S | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| U2HU1212NJ12NJ90T-52 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| THSD | Thread Series Designator | UN 2ND END |
| AAJD | Thread Class | 3B 2ND END |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| CQGM | Maximum Operating Pressure | 300.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| AKUU | End Connection Design | ELBOW 2ND END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| AAJD | Thread Class | 3B 1ST END |
| CRDW | Hydrostatic Test Pressure | 600.0 POUNDS PER SQUARE INCH |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRXX | Measuring Method And Length | 52.000 INCHES NOMINAL OVERALL |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| ABKV | Outside Diameter | 1.250 INCHES NOMINAL |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CRWL | Inside Surface Condition | SMOOTH |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AARX | Inside Diameter | 0.375 INCHES NOMINAL |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT AND WEATHERPROOF AND MILDEW RESISTANT AND SALT WATER RESISTANT |
| THSD | Thread Series Designator | UN 1ST END |
| ACKH | Minimum Inside Bending Radius | 5.000 INCHES |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AGAV | End Item Identification | SUPPORT EQUIPMENT, B-1 AIRCRAFT |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| CQJX | Nominal Thread Size | 1.062 INCHES 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 2ND END |
| CQCS | Layer Composition And Location | 1ST LAYER WOVEN COTTON WITH INTERWOVEN STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | Nominal Thread Size | 1.062 INCHES 2ND END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 145.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MEDA | Media For Which Designed | FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CMLP | Thread Quantity Per Inch | 12 1ST END |
| CMLP | Thread Quantity Per Inch | 12 2ND END |
| CQBD | Burst Test Pressure | 1200.0 POUNDS PER SQUARE INCH |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
