When you would like to secure affordable procurement options for Morris Material Handling Inc part number 44Q605D6, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Morris Material Handling Inc part number 44Q605D6 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-366-3737 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013663737 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 44Q605-D0 | 2 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 2ND END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.188 INCHES NOMINAL 1ST END |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.406 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AGFF | FLANGE WIDTH | 3.256 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRXX | MEASURING METHOD AND LENGTH | 52.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | DOUBLE OVAL SAE SPLIT TYPE FLANGE 2ND END |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID SINGLE RESPONSE |
| ABJH | TEMP RATING | 40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.830 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 16.500 INCHES |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 3.160 INCHES NOMINAL 1ST END |
| AFQN | FLANGE LENGTH | 3.720 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.880 INCHES NOMINAL 1ST END |
| AHNC | CONNECTION STYLE | PLAIN 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.469 INCHES NOMINAL 1ST END |
| AHNX | BOLT HOLE DIAMETER | 0.531 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQBD | BURST TEST PRESSURE | 12000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER SPIRALLY LAID STEEL WIRE AND 2ND LAYER SPIRALLY LAID STEEL WIRE AND 3RD LAYER SPIRALLY LAID STEEL WIRE AND 4TH LAYER SPIRALLY LAID STEEL WIRE AND OUTER LAYER MOLDED RUBBER,SYNTHETIC |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CTCJ | FLANGE STYLE | DOUBLE OVAL SAE SPLIT TYPE FLANGE 1ST END |
| FEAT | SPECIAL FEATURES | CRIMPED FITTINGS |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 2.750 INCHES NOMINAL 2ND END |
| AGAV | END ITEM IDENTIFICATION | 3810-01-268-1737,TRUCK MOUNTED CRANE |
| AARX | INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.315 INCHES NOMINAL 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CQGM | MAXIMUM OPERATING PRESSURE | 3000.0 POUNDS PER SQUARE INCH |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
