When you would like to secure affordable procurement options for Military Standards part number MS27066-10C, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Military Standards part number MS27066-10C for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4730-00-969-6656 Item PartTypeName: ELBOW,SWIVEL FLANGE TO HOSE | 4730 | 009696656 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-F-27272 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AEHZ | MAXIMUM OPERATING TEMP | 443.5 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC | CONNECTION STYLE | GRIPPING NIPPLE NOSE 2ND END |
| AHSJ | LEG LENGTH | 0.894 INCHES NOMINAL 1ST END |
| AHSJ | LEG LENGTH | 1.965 INCHES NOMINAL 2ND END |
| AKGF | NOMINAL WIDTH | 1.468 INCHES 1ST END |
| AKGG | NOMINAL LENGTH | 1.468 INCHES 1ST END |
| ARKN | FLANGE SHAPE | RECTANGULAR WITH HOLES 1ST END |
| AWLS | CONNECTION TYPE | FLANGE 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL HOSE GRIPPING 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 1500.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| CRFY | FLOW ANGLE | 90.0 DEGREES |
| CWCK | NOMINAL THICKNESS | 0.234 INCHES 1ST END |
| CWCQ | BOLT HOLE NOMINAL DIAMETER | 0.205 INCHES 1ST END |
| CWCY | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.038 INCHES 1ST END |
| CWDC | CENTER TO CENTER NOMINAL DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.038 INCHES 1ST END |
| CWDF | FLANGE FACE DESIGN | RAISED SWIVEL 1ST END |
| CWDH | RAISED FACE NOMINAL HEIGHT | 0.020 INCHES 1ST END |
| CWDL | RAISED FACE NOMINAL DIAMETER | 1.000 INCHES 1ST END |
| CWDW | NOMINAL INSIDE DIAMETER HOSE ACCOMMODATED | 0.562 INCHES 2ND END |
| CWDZ | NOMINAL OUTSIDE DIAMETER HOSE ACCOMMODATED | 0.706 INCHES 2ND END |
| MATT | MATERIAL | STEEL COMP 304 FLANGE |
| MATT | MATERIAL | STEEL COMP 304 UNION |
| MATT | MATERIAL | STEEL COMP 321 ELBOW |
| MATT | MATERIAL | STEEL COMP 321 NIPPLE |
| MATT | MATERIAL | STEEL COMP 321 SHOULDER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-T-8808 COND A MIL SPEC SINGLE MATERIAL RESPONSE ELBOW |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE FLANGE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE NIPPLE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE SHOULDER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 COND A FED SPEC SINGLE MATERIAL RESPONSE UNION |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL 1ST RESPONSE |
| MEDA | MEDIA FOR WHICH DESIGNED | WATER-OIL-GAS 2ND RESPONSE |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-F-27272 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZK | SPECIFICATION/STANDARD DATA | 96906-MS27066 GOVERNMENT STANDARD |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
