When you would like to secure affordable procurement options for Makino Inc part number 13C3, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Makino Inc part number 13C3 for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ACDC | Current Type | AC |
| APGF | Design Type | SCREW |
| AWHA | Bed Type | SOLID |
| AWLX | Electric Motor Quantity | 1 |
| AAXX | Mounting Type | FLOOR |
| ASHK | Electric Motor Horsepower Rating | 3.000 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
| ZZZY | Reference Number Differentiating Characteristics | AS DIFFERENTIATED BY CENTER TO CENTER DISTANCE,SPINDLE SPEED RANGE IN RPM AND ELECTRIC MOTOR HORSEPOWER RATING" |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| BTSZ | Spindle Speed Quantity | 24 |
| BTTB | Spindle Speed Range In Rpm | +30.0/+1800.0 |
| BTTD | Rated Swing | 15.000 INCHES NOMINAL |
| BTTF | Actual Swing Over Bed | 15.500 INCHES NOMINAL |
| AKSL | Purpose For Which Designed | GENERAL |
| BTTG | Swing Over Cross Slide | 9.500 INCHES NOMINAL |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED" |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYP | Hole Diameter Through Spindle | 1.531 INCHES NOMINAL |
| BTYQ | Carriage Quantity | 1 |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| FREQ | Frequency In Hertz | 60.0 |
| AKYD | Accessory Components And Quantity | PER MIL-STD 931 |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTYW | Gear Change Type | QUICK |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote