Obtain a Quote for Lockheed Martin Corporation Part Number 3P50004-229 Now

Part Number:  3P50004-229
Alternate P/N:  3P50004229
Manufacturer:  Lockheed Martin Corporation
NIIN:  00-075-4912
Item Name :  bracket angle
CAGE Code:  98897
INC Code :  16900
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Lockheed Martin Corporation part number 3P50004-229, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Lockheed Martin Corporation part number 3P50004-229 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 3P50004-229

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 3P50004-229 with NSN 5340-00-075-4912, 5340000754912

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5340-00-075-4912

Item PartTypeName:

BRACKET,ANGLE

53400007549120P
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
488065225

Characteristics Data of NSN 5340-00-075-4912, 5340000754912

MRCCriteriaCharacteristic
ADLKFIRST LEG LENGTH0.952 INCHES MINIMUM AND 0.972 INCHES MAXIMUM
ADLLSECOND LEG LENGTH1.299 INCHES MINIMUM AND 1.351 INCHES MAXIMUM
AHLFSECOND LEG WIDTH1.539 INCHES MINIMUM AND 1.663 INCHES MAXIMUM
AHLKFIRST LEG HOLE DIAMETER0.339 INCHES MINIMUM AND 0.349 INCHES MAXIMUM
AHLNSECOND LEG HOLE DIAMETER0.214 INCHES MINIMUM AND 0.224 INCHES MAXIMUM
AHLVSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AHLWSECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.239 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
AHPWFIRST LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
AHPXSECOND LEG THICKNESS0.056 INCHES MINIMUM AND 0.068 INCHES MAXIMUM
AHQNFIRST LEG WIDTH1.289 INCHES MINIMUM AND 1.351 INCHES MAXIMUM
AHQPFIRST LEG CORNER RADIUS0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AHQUFIRST LEG DISTANCE BETWEEN HOLE CENTERS ALONG WIDTH1.039 INCHES NOMINAL
AHRAFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG WIDTH0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AHRBFIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.250 INCHES MINIMUM AND 0.312 INCHES MAXIMUM
AJFQSECOND LEG END RADIUS0.359 INCHES MINIMUM AND 0.391 INCHES MAXIMUM
AJZUFIRST LEG STYLECORNER RADIUS
AKAUFIRST LEG HOLE ARRANGEMENT STYLETWO HOLES
AKBUSECOND LEG STYLEEND RADIUS AND TAPERED
AKCUSECOND LEG HOLE ARRANGEMENT STYLEONE HOLE
CSSPSECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
CSSQFIRST LEG ANGLE90.0 DEGREES NOMINAL
MATTMATERIALSTEEL COMP 410
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5504 ASSN STD SINGLE MATERIAL RESPONSE
STYLSTYLE DESIGNATORANGLE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top