When you would like to secure affordable procurement options for Lockheed Martin Corporation part number 773561-1, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Lockheed Martin Corporation part number 773561-1 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 1680-00-610-6333 Item PartTypeName: LEVER,REMOTE CONTROL | 1680 | 006106333 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 773561-1 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.750 INCHES NOMINAL |
| ASBP | BORE TYPE | SPLINED |
| BFGW | CENTER TO CENTER DISTANCE BETWEEN LINK AND SHAFT HOLES | 1.500 INCHES NOMINAL |
| BFGX | SHAFT END THICKNESS | 0.385 INCHES MINIMUM AND 0.390 INCHES MAXIMUM |
| BFGY | LINK END THICKNESS | 0.125 INCHES NOMINAL |
| BFHA | LINK END HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.199 INCHES MAXIMUM |
| CZLP | SHAFT SECURING METHOD | SPLINE |
| FEAT | SPECIAL FEATURES | OFFSET HEIGHT: 1.285 IN. NOMINAL |
| MATT | MATERIAL | STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6050 MIL SPEC SINGLE MATERIAL RESPONSE |
| STYL | STYLE DESIGNATOR | OFFSET,ONE HOLE LINK END |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote