Obtain a Quote for Kaitlin Corp Part Number A3802E551 Now

Part Number:  A3802E551
Manufacturer:  Kaitlin Corp
NIIN:  00-737-2138
Item Name :  shaft axle automoti
CAGE Code:  63734
INC Code :  10852
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Kaitlin Corp part number A3802E551, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Kaitlin Corp part number A3802E551 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A3802E551

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number A3802E551 with NSN 2520-00-737-2138, 2520007372138

NSNFSCNIINCLSHazmatDEMILCancelled NSN
2520-00-737-2138

Item PartTypeName:

SHAFT,AXLE,AUTOMOTIVE

2520007372138P
CIICHCCESDPMICCriticalityENAC
U
Part NumberISCRNVCRNCCHCCMSDSSADC
364938595

Characteristics Data of NSN 2520-00-737-2138, 2520007372138

MRCCriteriaCharacteristic
AAZQHOLE DEPTH0.531 INCHES NOMINAL
AMDMFIRST END SPLINE LENGTH2.9062 INCHES NOMINAL
AMDNFIRST END SPLINE MINOR DIAMETER1.600 INCHES MINIMUM AND 1.608 INCHES MAXIMUM
AMDPFIRST END SPLINE MAJOR DIAMETER1.859 INCHES MINIMUM AND 1.861 INCHES MAXIMUM
AMQAFIRST END TYPESPLINED
BBCDFIRST END SPLINE QUANTITY12
BBCFSECOND END SPLINE QUANTITY16
BNTBFIRST END ENGAGING/LOCKING/POSITIONING FACILITYLOCKING DEVICE GROOVE
BNTNSECOND END SPLINE PRESSURE ANGLE IN DEG29.0
BNTTSECOND END BEARING SEATNOT INCLUDED
BNTXEND HOLE TYPEDRILLED
BNYXFIRST END SPLINE TYPESTRAIGHT
ABHPOVERALL LENGTH41.188 INCHES NOMINAL
AETCMETALLIC HARDNESS RATING35.0 MINIMUM ROCKWELL C AND 45.0 MAXIMUM ROCKWELL C
AGGPDRILLED HOLE DIAMETER0.982 INCHES MINIMUM AND 0.985 INCHES MAXIMUM
AMGASECOND END SPLINE LENGTH2.750 INCHES NOMINAL
AMGFSECOND END PITCH DIAMETER1.879 INCHES NOMINAL
AMQFSECOND END TYPESPLINED
ASXKHOLE QUANTITY1
BNPJFIRST END FACILITY DIAMETER1.655 INCHES MINIMUM AND 1.662 INCHES MAXIMUM
BNTCFIRST END FACILITY WIDTH0.151 INCHES MINIMUM AND 0.154 INCHES MAXIMUM
BNTDFIRST END FACILITY LOCATIONLOCATED 2.408 IN. MIN.,2.418 IN. MAX FROM STRAIGHT SPLINE
BNTFFIRST END BEARING SEATNOT INCLUDED
BNTMSECOND END SPLINE TYPEINVOLUTE
MATTMATERIALSTEEL

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top