330044P01 is a Sleeve Shaft Pump manufactured by Howden Fluid Systems.

What are the specifications of 330044P01?

Please contact us for detailed specifications of 330044P01.

Is 330044P01 available for immediate shipping?

Yes, we ship worldwide with same-day handling on many parts depending on stock availability.

Can Aerospace Orbit supply bulk quantities of 330044P01?

Yes, we support both small and large volume orders depending on stock.

Obtain a Quote for Howden Fluid Systems Part Number 330044P01 Now

Name: Part Number 330044P01 - Sleeve Shaft Pump
Brand: Howden Fluid Systems
SKU: 330044p01
Availability: InStock
Rating: 4.6 (226 reviews)

Part Number: 330044P01

Manufacturer: Howden Fluid Systems

NSN: 4320-01-176-2043

NIIN: 01-176-2043

Item Name : sleeve shaft pump

CAGE Code: 33654

FSC: 4320 Power AND Hand Pumps

FSG: 43 Pumps AND Compressors

INC Code : 61082

Country: USA

NCB Code: 01

When you would like to secure affordable procurement options for Howden Fluid Systems part number 330044P01, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Howden Fluid Systems part number 330044P01 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 330044P01

Contact Information

“*” Required Fields Are Compulsory

* By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.

I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
ASAP Semiconductor is a wholly independent aftermarket parts distributor.
This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.

If You Have Multiple Parts Requirement,
You Can Upload Your Parts List or BOM Here!

Upload

Characteristics Data of NSN 4320-01-176-2043, 4320011762043

MRC	Criteria	Characteristic
SFTT	SURFACE TREATMENT	ANODIZE INSIDE DIAMETER SURFACE OF BODY CHROMATE LEFT END SURFACE OF BODY AND FLANGE CHROMATE RIGHT END SURFACE OF BODY
SR-5	MANUFACTURERS CODE	58163
ADAS	BODY INSIDE DIAMETER	0.8000 INCHES MINIMUM AND 0.8020 INCHES MAXIMUM
CSYT	(NON-CORE DATA) CHAMFER ANGLE	45.0 DEGREES NOMINAL 45.0 DEGREES NOMINAL
AAZP	(NON-CORE DATA) CHAMFER LENGTH	0.0250 INCHES MINIMUM AND 0.0300 INCHES MAXIMUM 0.0570 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM
AGFF	FLANGE WIDTH	0.2300 INCHES MINIMUM AND 0.2600 INCHES MAXIMUM
MATT	MATERIAL	ALUMINUM ALLOY 6061 OVERALL
MDCL	MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-225/8 FED SPEC ALL MATERIAL RESPONSES OVERALL
STYL	STYLE DESIGNATOR	SOLID
AGAV	III END ITEM IDENTIFICATION	F-16 ACFT
AEPR	FLANGE OUTSIDE DIAMETER	1.0600 INCHES MINIMUM AND 1.0700 INCHES MAXIMUM
BZLX	CORNER SHAPE	SQUARE OUTSIDE LEFT CORNER CHAMFERED OUTSIDE RIGHT CORNER SQUARE INSIDE RIGHT CORNER CHAMFERED INSIDE LEFT CORNER ROUND LEFT FLANGE OUTSIDE RIGHT CORNER ROUND LEFT FLANGE BODY CORNER
ABGG	(NON-CORE DATA) RADIUS	0.0600 INCHES NOMINAL 0.0600 INCHES NOMINAL
SR-5	THE MANUFACTURERS DATA
SR-5	DESIGN CONTROL REFERENCE	H330044P01
FEAT	SPECIAL FEATURES	ONE GROVE 0.210 IN. W BY 0.055 IN. DP 0.750 IN. FROM 1ST END,0.020 IN. RADIUS GROVE BOTTOM CORNERS; TWELVE EQUALLY SPACED 0.035 IN. W BY 0.094 IN. DP SLOTS ON 1ST END FACE
ABHP	OVERALL LENGTH	2.1870 INCHES NOMINAL
ADAR	BODY OUTSIDE DIAMETER	1.0500 INCHES MINIMUM AND 1.0510 INCHES MAXIMUM
STDC	SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	MIL-A-8625,TYPE 3 CLASS 1 MIL SPEC 2ND TREATMENT RESPONSE INSIDE DIAMETER SURFACE OF BODY MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 1ST TREATMENT RESPONSE LEFT END SURFACE OF BODY AND FLANGE MIL-A-8625,TYPE 1 CLASS 1 MIL SPEC 3RD TREATMENT RESPONSE RIGHT END SURFACE OF BODY