When you would like to secure affordable procurement options for General Electric Company part number G201011, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on General Electric Company part number G201011 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-404-3143 Item PartTypeName: GEARSHAFT,SPUR | 3040 | 004043143 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| G201011 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.812 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | RAWIN SET,AN/GMD-2A |
| AJLA | TEETH QUANTITY | 13 |
| AJWS | GEAR OUTSIDE DIAMETER | 0.664 INCHES MINIMUM AND 0.666 INCHES MAXIMUM |
| CWPP | PRESSURE ANGLE | 45.00000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL CORROSION RESISTING |
| CYER | GEAR MATERIAL | STEEL CORROSION RESISTING |
| FEAT | SPECIAL FEATURES | FINISH FS-105; MAXIMUM CENTER DRILL 0.812 IN; CHAMFER BOTH ENDS 0.031 IN; 0.103 IN. DEPTH |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote