Obtain a Quote for General Dynamics Global Imaging Part Number 7812 Now

Part Number:  7812
NIIN:  00-759-7303
Item Name :  resistor variable n
CAGE Code:  10112
INC Code :  37407
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for General Dynamics Global Imaging part number 7812, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on General Dynamics Global Imaging part number 7812 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for 7812

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number 7812 with NSN 5905-00-759-7303, 5905007597303

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5905-00-759-7303

Item PartTypeName:

RESISTOR,VARIABLE,NONWIRE WOUND

59050075973030N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
20049-3225

Characteristics Data of NSN 5905-00-759-7303, 5905007597303

MRCCriteriaCharacteristic
AAVLPILOT DIAMETER0.6240 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM
ABHPOVERALL LENGTH2.362 INCHES NOMINAL
ABPCUNDERCUT WIDTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPMBODY DIAMETER0.850 INCHES MINIMUM AND 0.890 INCHES MAXIMUM
ABWVSHAFT DIAMETER0.124 INCHES MINIMUM AND 0.125 INCHES MAXIMUM
ADAVOVERALL DIAMETER0.995 INCHES NOMINAL
AEDAMOUNTING LIP DEPTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
AEDZSHAFT BEARING TYPEBALL
AEFMMAXIMUM STOP TORQUE80.00 INCH-OUNCES
APXHTERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
AXGYMOUNTING METHODCLAMP RING
CBBLFEATURES PROVIDEDNONMETALLIC SHAFT
CQCCELECTRICAL RESISTANCE PER SECTION5.0 OHMS SINGLE SECTION
CQCKROTARY ACTUATOR TRAVEL IN ANGULAR DEG3700.0 NOMINAL
CQFLFUNCTION CONFORMITY TOLERANCE PER SECTION0.50/0.50 SINGLE SECTION
CQGNAMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER150.0 SINGLE SECTION
CRFJTEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS40.0/40.0 SINGLE SECTION
CRGDPOWER DISSIPATION RATING PER SECTION IN WATTS1.0 FREE AIR SINGLE SECTION
CRSSRESISTANCE TOLERANCE PER SECTION IN PERCENT10.0 TO 10.0 SINGLE SECTION
CSBXFUNCTION CHARACTERISTIC PER SECTIONSINGLE SECTION LINEAR
TTQYTERMINAL TYPE AND QUANTITY3 SOLDER STUD
AAPNSECTION QUANTITY1
AAQLBODY STYLECYLINDRICAL SERVO MOUNTED
AARGRELIABILITY INDICATORNOT ESTABLISHED
AAVMPILOT LENGTH0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM
ABPAUNDERCUT DIAMETER0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM
ABXFSHAFT LENGTH0.531 INCHES MINIMUM AND 0.593 INCHES MAXIMUM
ADAQBODY LENGTH1800.000 INCHES NOMINAL
AECZMOUNTING LIP DIAMETER0.8500 INCHES MINIMUM AND 0.8900 INCHES MAXIMUM
AEDXSHAFT STYLEROUND
AEFDACTUATOR TYPESINGLE SHAFT
AEFHEFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION3600.0 NOMINAL
AEFKMAXIMUM STARTING TORQUE1.50 INCH-OUNCES
AFJNFRAGILITY FACTORMODERATELY RUGGED
CRGMFUNCTION CONFORMITY PER SECTIONSINGLE SECTION INDEPENDENT LINEARITY
CRSXACTUATOR TRAVEL CONTROL FEATURESTOPS
CSDHAMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER85.0 SINGLE SECTION

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top