When you would like to secure affordable procurement options for Gates Corp part number 16C12M-16FJX-16, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Gates Corp part number 16C12M-16FJX-16 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-436-0317 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014360317 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 16C12M-16FJX-16 | 2 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKU | Flange Thickness | 0.312 INCHES NOMINAL 2ND END |
| AFQN | Flange Length | 2.780 INCHES MAXIMUM 2ND END |
| AGFF | Flange Width | 2.220 INCHES NOMINAL 2ND END |
| FEAT | Special Features | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| ABKV | Outside Diameter | 1.500 INCHES NOMINAL |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| MRC | Decoded Requirement | Clear Text Reply |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| ACKH | Minimum Inside Bending Radius | 6.000 INCHES |
| CQCS | Layer Composition And Location | 4TH LAYER SPIRALLY LAID STEEL WIRE |
| CRWL | Inside Surface Condition | SMOOTH |
| AWLS | Connection Type | PLAIN FACE FLANGE 2ND END |
| AAJD | Thread Class | 2B 1ST END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM | Maximum Operating Pressure | 4000.0 POUNDS PER SQUARE INCH |
| AECS | Bolt Hole Quantity | 4 2ND END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AKUT | End Flange Construction | SOLID 2ND END |
| AKUU | End Connection Design | STRAIGHT 2ND END |
| CRDW | Hydrostatic Test Pressure | 8000.0 POUNDS PER SQUARE INCH |
| AKXL | End Fitting Component And Material | COMPLETE FITTING STEEL ALL ENDS |
| ADUY | Center To Center Distance Between Bolt Holes Along Width | 1.030 INCHES NOMINAL 2ND END |
| ADUZ | Center To Center Distance Between Bolt Holes Along Length | 2.062 INCHES NOMINAL 2ND END |
| CQBD | Burst Test Pressure | 16000.0 POUNDS PER SQUARE INCH |
| CQJX | Nominal Thread Size | 1.312 INCHES 1ST END |
| CTCJ | Flange Style | DOUBLE OVAL (SAE SPLIT TYPE FLANGE) 2ND END |
| AARX | Inside Diameter | 1.000 INCHES NOMINAL |
| CRJM | Outer Covering Environmental Protection | OIL RESISTANT |
| CRXX | Measuring Method And Length | 110.000 INCHES NOMINAL WORKING |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AHNC | Connection Style | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AGAV | End Item Identification | IWO JIMA CLASS LPH |
| AHNX | Bolt Hole Diameter | 0.406 INCHES NOMINAL 2ND END |
| CMLP | Thread Quantity Per Inch | 12 1ST END |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| CQCS | Layer Composition And Location | 5TH LAYER SPIRALLY LAID STEEL WIRE |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED FABRIC |
| ADJS | Exterior Color | BLACK |
| CQCS | Layer Composition And Location | 3RD LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | Layer Composition And Location | 2ND LAYER SPIRALLY LAID STEEL WIRE |
| THSD | Thread Series Designator | UN 1ST END |
| CQCS | Layer Composition And Location | OUTER LAYER MOLDED RUBBER, CHLOROPRENE |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
