Obtain a Quote for G A Richards And Co Inc Part Number A51F11531-11 Now

Part Number:  A51F11531-11
Alternate P/N:  A51F1153111
Manufacturer:  G A Richards And Co Inc
NIIN:  00-762-9213
Item Name :  pin shoulder headle
CAGE Code:  65789
INC Code :  16749
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for G A Richards And Co Inc part number A51F11531-11, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on G A Richards And Co Inc part number A51F11531-11 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for A51F11531-11

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number A51F11531-11 with NSN 5315-00-762-9213, 5315007629213

NSNFSCNIINCLSHazmatDEMILCancelled NSN
5315-00-762-9213

Item PartTypeName:

PIN,SHOULDER,HEADLESS

53150076292130N
CIICHCCESDPMICCriticalityENAC
UA0
Part NumberISCRNVCRNCCHCCMSDSSADC
A51F11531-1161C9

Characteristics Data of NSN 5315-00-762-9213, 5315007629213

MRCCriteriaCharacteristic
AAGZFIRST END STYLECHAMFERED
AAHPSECOND END STYLEPOINTED
AAJFTHREAD DIRECTIONRIGHT-HAND
AATRSHANK LENGTH0.712 INCHES NOMINAL
AMCSFIRST END TAPER LENGTH0.047 INCHES NOMINAL
CQBBSECOND END RELATIONSHIP WITH FIRST ENDNOT IDENTICAL
CQJXNOMINAL THREAD SIZE0.190 INCHES
CQTRSECOND SHANK DIAMETER0.214 INCHES MINIMUM AND 0.215 INCHES MAXIMUM
CRMGFIRST END TAPER ANGLE45.0 DEGREES NOMINAL
CSYMSURFACE FINISH125.000 MICROINCHES OVERALL
CTHCSECOND END TAPER ANGLE30.0 DEGREES NOMINAL
SFTTSURFACE TREATMENTPASSIVATE OVERALL
STDCSURFACE TREATMENT DOCUMENT AND CLASSIFICATIONMIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL
THSDTHREAD SERIES DESIGNATORUNJF
AAJDTHREAD CLASS3A
AASATHREAD LENGTH0.400 INCHES NOMINAL
AAVJSHOULDER WIDTH ACROSS FLATS0.250 INCHES NOMINAL
AAZESHANK DIAMETER0.184 INCHES MINIMUM AND 0.190 INCHES MAXIMUM
ABHPOVERALL LENGTH1.212 INCHES NOMINAL
AMFMSECOND END TAPER LENGTH0.250 INCHES NOMINAL
CQFMHARDNESS RATING35.0 ROCKWELL C MINIMUM OVERALL AND 43.0 ROCKWELL C MAXIMUM OVERALL
CRDYFIRST END LOCATIONTHREADED END
CWASSECOND SHANK LENGTH0.375 INCHES NOMINAL
FEATSPECIAL FEATURES0.063 IN. RADIUS ON SHORTER SHANK END
MATTMATERIALSTEEL COMP 630 OVERALL
MDCLMATERIAL DOCUMENT AND CLASSIFICATIONAMS 5643,17-4PH ASSN STD SINGLE MATERIAL RESPONSE OVERALL
STYLSTYLE DESIGNATORSHOULDER

Complete Aerospace and NSN Parts Purchasing Platform

asacb_

AS9120B and ISO 9001:2015

asap_

Aviation Suppliers Association Member

cerified

FAA AC 0056B Accredited

supplier

AS 6081:2012 Certification

esd_asso

ESD S20.20-2014 Certification

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top