When you would like to secure affordable procurement options for Federal Specifications part number 00D676A, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Federal Specifications part number 00D676A for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ALYE | ROTATION REVERSIBILITY FEATURE | NOT INCLUDED |
| ZZZX | DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY DRILLING CAPABILITY,SPINDLE SPEED RANGE IN RPM,HEAD TYPE,SWIVE ADJUSTMENTIN DEG |
| BTSZ | SPINDLE SPEED QUANTITY | 4 |
| BTTB | SPINDLE SPEED RANGE IN RPM | 470.0 TO 1950.0 |
| SR-1 | SPEC/STD CONTROLLING DATA | |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 1 CLASS AND 14 SIZE |
| AJGD | HEAD TYPE | RADIAL SWINGING/SLIDING |
| BNQL | MAIN DRIVE TYPE | ELECTRIC MOTOR |
| BNRL | SPINDLE TRAVEL DISTANCE | 4.000 INCHES NOMINAL |
| BNRW | BASE WORKING SURFACE LENGTH | 7.000 INCHES NOMINAL |
| BNRX | BASE WORKING SURFACE WIDTH | 10.000 INCHES NOMINAL |
| ELEC | VOLTAGE IN VOLTS | 110.000 |
| BNRZ | COLUMN TYPE | ROUND |
| BNSC | DRILL CHUCK SIZE ACCOMMODATED | 1/2 IN. KEY |
| BNSD | DISTANCE FROM SPINDLE CENTER TO COLUMN | 7.000 INCHES NOMINAL |
| BNSF | BASE WORKING SURFACE TYPE | SLOTTED |
| BNSG | BASE WORKING SURFACE SHAPE | RECTANGULAR |
| BNSP | UPPER WORKING SURFACE SHAPE | SQUARE |
| AKSQ | FUNGUS RESISTANT TREATMENT | NOT INCLUDED |
| BNSW | UPPER WORKING SURFACE ADJUSTMENT FEATURE | INCLUDED |
| BNSX | UPPER WORKING SURFACE VERTICAL ADJUSTMENT | ANY ACCEPTABLE |
| ACDC | CURRENT TYPE | AC |
| BNSY | SWIVEL ADJUSTMENT IN DEG | 360.000 |
| BNSZ | TILT ADJUSTMENT DIRECTION AND ANGLE IN DEG | 90.0 LEFT 90.0 RIGHT |
| AKYD | ACCESSORY COMPONENTS AND QUANTITY | 1 CORD,15 FT LG,1 CORD GRIP PLUG,POLARIZED 3 POLE |
| FAAZ | PHASE | SINGLE |
| BCRH | SPINDLE QUANTITY | 1 |
| AQDD | FEED TYPE | HAND |
| BWJN | UPPER WORKING SURFACE MOUNTING LOCATION | COLUMN |
| BWJP | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO UPPER WORKING SURFACE | ANY ACCEPTABLE |
| BNRY | DRILLING CAPABILITY | 1/2 IN. DRILLING CAPACITY IN CAST IRON,3/8 IN.DRILLING CAPACITY IN STEEL |
| BNSH | BASE WORKING SURFACE AREA | ANY ACCEPTABLE |
| BNSL | BASE WORKING SURFACE MOUNTING LOCATION | LOCATED ON BASE |
| BNSM | MAXIMUM DISTANCE FROM CHUCK/SPINDLE NOSE TO BASE WORKING SURFACE | ANY ACCEPTABLE |
| BNSN | UPPER WORKING SURFACE TYPE | SLOTTED |
| BNSS | UPPER WORKING SURFACE LENGTH | 10.000 INCHES MINIMUM |
| BNST | UPPER WORKING SURFACE WIDTH | 10.000 INCHES MINIMUM |
| BPSX | HEAD VERTICAL ADJUSTMENT | ANY ACCEPTABLE |
| SR-1 | MANUFACTURERS CODE | 81348 |
| AAXX | MOUNTING TYPE | BENCH |
| BQLR | SPINDLE TYPE | SOLID MALE TAPERED FOR DRILL CHUCK |
| ALBH | RADIO INTERFERENCE SHIELDING | NOT PROVIDED |
| SR-1 | NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCE | 00D676A |
| FREQ | FREQUENCY IN HERTZ | 60.000 |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
