When you would like to secure affordable procurement options for Electric Boat Corporation part number H778-1407-F127, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Electric Boat Corporation part number H778-1407-F127 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-508-4491 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 015084491 | W | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| H778-1407-F127 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBB | (NON-CORE DATA) SECOND END RELATIONSHIP WITH FIRST END | IDENTICAL |
| AHNX | BOLT HOLE DIAMETER | 0.750 INCHES NOMINAL 1ST END |
| CQBD | BURST TEST PRESSURE | 1400.0 POUNDS PER SQUARE INCH |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| MEDA | MEDIA FOR WHICH DESIGNED | HYDRAULIC FLUID AND WATER, SALT SINGLE RESPONSE |
| CQGH | (NON-CORE DATA) FIRST END FITTING/COMPONENT AND MATERIAL | COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQGM | MAXIMUM OPERATING PRESSURE | 350.0 POUNDS PER SQUARE INCH |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ABKG | BOLT CIRCLE DIAMETER | 4.750 INCHES NOMINAL 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| ABKU | FLANGE THICKNESS | 0.440 INCHES NOMINAL 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED POLYESTER CORD 2ND LAYER BRAIDED POLYESTER CORD OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| ADJM | (NON-CORE DATA) INNER CONVEYING TUBE MATERIAL | RUBBER, SYNTHETIC |
| CQBG | (NON-CORE DATA) FIRST END SWIVEL ACTION CAPABILITY | NOT INCLUDED |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | DOGLEG HOSE ASSEMBLY |
| AHNC | CONNECTION STYLE | PLAIN SWIVEL 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 13.250 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| AARX | INSIDE DIAMETER | 1.810 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | WEAPON SYSTEM ESSENTIAL; END MATES WITH ANSI B16.5 150 POUND FLANGE; ASSEMBLY HAS 90 DEGREE ELBOW 18.5 INCH FROM EACH END |
| AGAV | END ITEM IDENTIFICATION | SHIP; EAFW MISC PARTS |
| ABKV | OUTSIDE DIAMETER | 2.220 INCHES NOMINAL |
| CRXX | MEASURING METHOD AND LENGTH | 37.000 INCHES NOMINAL OVERALL |
| CTCJ | FLANGE STYLE | ROUND W/ BOLT HOLES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 700.0 POUNDS PER SQUARE INCH |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OXIDATION RESISTANT AND LIGHT RESISTANT AND WEATHERPROOF |
| AEPR | FLANGE OUTSIDE DIAMETER | 6.000 INCHES NOMINAL 1ST END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
