When you would like to secure affordable procurement options for Eaton Aeroquip Inc part number AE5140P0127-265, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Eaton Aeroquip Inc part number AE5140P0127-265 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-312-2533 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 013122533 | W | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AE5140P0127-265 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 1.375 INCHES NOMINAL |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.812 INCHES NOMINAL 2ND END |
| AFQN | FLANGE LENGTH | 2.375 INCHES NOMINAL 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE,PARTIAL COVERAGE AND OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| FEAT | SPECIAL FEATURES | HIGH STRENGTH HOSE ASSEMBLY |
| AAJD | THREAD CLASS | 2B 1ST END |
| ABJH | TEMP RATING | 40.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV | OUTSIDE DIAMETER | 1.704 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 9.000 INCHES |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 265.0 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.812 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.266 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.062 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 2.135 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBD | BURST TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 800.0 POUNDS PER SQUARE INCH |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 12.875 INCHES NOMINAL WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABKU | FLANGE THICKNESS | 0.297 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 2.375 INCHES NOMINAL 2ND END |
| CQGM | MAXIMUM OPERATING PRESSURE | 250.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.875 INCHES 1ST END |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| CRFY | FLOW ANGLE | 45.0 DEGREES 1ST END |
| CTCJ | FLANGE STYLE | RECTANGULAR INCLUDES SQUARE 2ND END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
