When you would like to secure affordable procurement options for Eaton Aeroquip Inc part number MIL-H-25579, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Eaton Aeroquip Inc part number MIL-H-25579 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-992-5182 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 009925182 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MIL-H-25579 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJD | THREAD CLASS | 3B 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AARX | INSIDE DIAMETER | 0.625 INCHES NOMINAL |
| ABJH | TEMP RATING | 67.0 DEG FAHRENHEIT AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.375 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 0.789 INCHES NOMINAL |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 6.500 INCHES |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| ADKX | ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG | 317.0 |
| ADLF | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLG | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLH | UNABLE TO DECODE | UNABLE TO DECODE |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | 1.156 INCHES NOMINAL 2ND END |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | 1.156 INCHES NOMINAL 2ND END |
| AECS | BOLT HOLE QUANTITY | 4 1ST END |
| AFQN | FLANGE LENGTH | 1.610 INCHES NOMINAL 2ND END |
| AGFF | FLANGE WIDTH | 1.610 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | RAISED SWIVEL 2ND END |
| AHNX | BOLT HOLE DIAMETER | 0.205 INCHES NOMINAL 2ND END |
| AJED | RAISED FACE HEIGHT | 0.093 INCHES NOMINAL 2ND END |
| AJEE | RAISED FACE DIAMETER | 1.156 INCHES NOMINAL 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | FLANGE STEEL COMP 304 ALL ENDS |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL 4TH END |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT STEEL COMP 304 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | SOCKET STEEL COMP 304 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | UNION STEEL COMP 304 3RD END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE PASSIVATE ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NUT PASSIVATE 1ST END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | SOCKET PASSIVATE 3RD END |
| AWLS | CONNECTION TYPE | RAISED FACE FLANGE 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQBD | BURST TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CQHW | UNABLE TO DECODE | UNABLE TO DECODE |
| CQJX | NOMINAL THREAD SIZE | 1.062 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 45.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ACID RESISTANT AND ALCOHOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND SOLVENT RESISTANT AND SALT WATER RESISTANT |
| CRSM | VACUUM IN TORR | 254.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | 39.000 INCHES NOMINAL WORKING |
| CRZY | UNABLE TO DECODE | UNABLE TO DECODE |
| CTCJ | FLANGE STYLE | RECTANGULAR INCLUDES SQUARE 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-PLASTIC,POLYTETRAFLUOROETHYLENE |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
