Obtain a Quote for Dynalec Corporation Part Number PL7000P07917PC2 Now

Part Number:  PL7000P07917PC2
Manufacturer:  Dynalec Corporation
NIIN:  00-557-5328
Item Name :  generator tachomete
CAGE Code:  12763
INC Code :  20241
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Dynalec Corporation part number PL7000P07917PC2, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Dynalec Corporation part number PL7000P07917PC2 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for PL7000P07917PC2

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


Characteristics Data of NSN 6680-00-557-5328, 6680005575328

MRCCriteriaCharacteristic
BKPCCALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS3.0 DC
AAJVOVERALL WIDTH3.312 INCHES
AASATHREAD LENGTH0.500 INCHES NOMINAL SINGLE END
AAJUOVERALL LENGTH5.406 INCHES
CWCSLENGTH OF SHAFT FROM HOUSING1.125 INCHES SINGLE END
CWFYNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH2.750 INCHES
AXHRMOUNTING FACILITY TYPE AND QUANTITY4 UNTHREADED HOLE
CWHZSHAFT END CHARACTERISTICA2 FIRST STYLE FIRST END A11 SECOND STYLE SECOND END
AYHEEXCITOR TYPESEPARATELY EXCITED
ABWVSHAFT DIAMETER0.6250 INCHES NOMINAL SINGLE END
AKCTSHAFT ROTATION DIRECTIONCLOCKWISE OR COUNTERCLOCKWISE SINGLE END
CWFXROTOR SPEED RATING IN RPM300.0 LOW FULL LOAD AND 2500.0 HIGH FULL LOAD
CBBLFEATURES PROVIDEDHORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION
TTQYTERMINAL TYPE AND QUANTITY1 CONNECTOR, PLUG
SR-1NON-DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-T-16049
ACDCCURRENT TYPEDC INPUT
BFLQCALIBRATION SPEED IN RPM1000.0
AAJTOVERALL HEIGHT4.625 INCHES
SR-1MANUFACTURERS CODE81349
AXGYMOUNTING METHODFIXED BASE
BDJDACCURACY RANGE IN PERCENT-2.0 TO 2.0
CWGLCURRENT RATING IN AMPS0.060 SINGLE INPUT
SR-1SPEC/STD CONTROLLING DATA
AAPPELECTRICAL RESISTANCE8.0 OHMS
CWDTNOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH0.875 INCHES
BFMRKEYWAY CENTER TO SHAFT END DISTANCE0.875 INCHES NOMINAL SINGLE END
CNMKWOODRUFF KEY SIZE DESIGNATION30 SINGLE END
SR-1DEFINITIVE GOVERNMENT SPEC/STD REFERENCEMIL-T-16049TYPE1CEFB

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top