When you would like to secure affordable procurement options for Designatronics Incorporated part number L8A-120P2, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Designatronics Incorporated part number L8A-120P2 for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| MATT | Material | STEEL COMP 303 OVERALL |
| CWQL | Nominal Distance Between Body Face And Protruding Hub End | 0.281 INCHES FIRST END |
| CWNH | Tooth Form | STANDARD |
| CWTR | Hub Style Designator | PINNED FIRST END |
| CWFR | Nominal Overall Length | 0.343 INCHES |
| CWRS | Bore Nominal Diameter | 0.120 INCHES BOTH ENDS |
| CWPP | Pressure Angle | 20.0000 DEGREES |
| AJLA | Teeth Quantity | 120 |
| CWTX | Hub Nominal Diameter | 0.250 INCHES FIRST END |
| MDCL | Material Document And Classification | AISI 303 FED STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| MRC | Decoded Requirement | Clear Text Reply |
| CWCD | Nominal Outside Diameter | 0.0670 INCHES |
| CWRM | Face Nominal Width | 0.062 INCHES |
| AGJS | Pitch Diameter | 1.0000 INCHES NOMINAL |
| ANTP | Bore Style | PLAIN BOTH ENDS |
| STYL | Style Designator | PROTRUDING HUB |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote