When you would like to secure affordable procurement options for Dana Corp part number 141 91890, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Dana Corp part number 141 91890 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-00-808-7908 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 008087908 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MILH13531TYPE1 | 2 | 1 | 4 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B 1ST END |
| ABKV | OUTSIDE DIAMETER | 1.454 INCHES MINIMUM AND 1.546 INCHES MAXIMUM |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 11.000 INCHES |
| AHNC | CONNECTION STYLE | INVERTED FLARE 2ND END |
| AKUU | END CONNECTION DESIGN | ELBOW 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | NIPPLE STEEL 2ND END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NIPPLE CADMIUM 1ST END |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | NUT CADMIUM 2ND END |
| AWLS | CONNECTION TYPE | THREADED INTERNAL TUBE 1ST END |
| CMLP | THREAD QUANTITY PER INCH | 11-1/2 2ND END |
| CQBB | UNABLE TO DECODE | UNABLE TO DECODE |
| CQGM | MAXIMUM OPERATING PRESSURE | 1000.0 POUNDS PER SQUARE INCH |
| CQJX | NOMINAL THREAD SIZE | 1.000 INCHES 2ND END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 1ST END |
| CRDW | HYDROSTATIC TEST PRESSURE | 2000.0 POUNDS PER SQUARE INCH |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | MILDEW RESISTANT AND OIL RESISTANTOIL RESISTANT |
| CRXX | MEASURING METHOD AND LENGTH | 47.500 INCHES MINIMUM WORKING AND 48.500 INCHES MAXIMUM WORKING |
| MEDA | MEDIA FOR WHICH DESIGNED | FUEL/OIL,HYDROCARBON SINGLE RESPONSE |
| THSD | THREAD SERIES DESIGNATOR | NPTF 2ND END |
| THSD | THREAD SERIES DESIGNATOR | UN 1ST END |
| ZZZK | SPECIFICATION/STANDARD DATA | MIL-H-13531,TYPE 1 PROFESSIONAL/INDUSTRIAL ASSOCIATION SPECIFICATION |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| AAJF | THREAD DIRECTION | RIGHT-HAND 1ST END |
| AAJF | THREAD DIRECTION | RIGHT-HAND 2ND END |
| AARX | INSIDE DIAMETER | 0.977 INCHES MINIMUM AND 1.023 INCHES MAXIMUM |
| ABJH | TEMP RATING | 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJM | UNABLE TO DECODE | UNABLE TO DECODE |
| ADLF | UNABLE TO DECODE | UNABLE TO DECODE |
| AHNC | CONNECTION STYLE | SWIVEL NUT FLARE 1ST END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 2ND END |
| AKXL | END FITTING COMPONENT AND MATERIAL | NUT STEEL 1ST END |
| AWLS | CONNECTION TYPE | THREADED EXTERNAL PIPE 2ND END |
| CMLP | THREAD QUANTITY PER INCH | 12 1ST END |
| CQBD | BURST TEST PRESSURE | 4000.0 POUNDS PER SQUARE INCH |
| CQBG | UNABLE TO DECODE | UNABLE TO DECODE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER BRAIDED STEEL WIRE |
| CQHW | UNABLE TO DECODE | UNABLE TO DECODE |
| CQJX | NOMINAL THREAD SIZE | 1.312 INCHES 1ST END |
| CQRB | SEAT ANGLE | 37.0 DEGREES 2ND END |
| CRFY | FLOW ANGLE | 90.0 DEGREES 1ST END |
| CRLL | UNABLE TO DECODE | UNABLE TO DECODE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRZY | UNABLE TO DECODE | UNABLE TO DECODE |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER,BUNA-N |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
