When you would like to secure affordable procurement options for Dana Corp part number 6-14-39, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Dana Corp part number 6-14-39 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-640-3761 Item PartTypeName: CAP,DUST,PROPELLER SHAFT | 2520 | 006403761 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| K6-14-39 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AARX | INSIDE DIAMETER | 3.557 INCHES MINIMUM AND 3.562 INCHES MAXIMUM |
| AASA | THREAD LENGTH | 0.375 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| ABKV | OUTSIDE DIAMETER | 3.649 INCHES MINIMUM AND 3.658 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.750 INCHES NOMINAL |
| ABUJ | THREAD SIZE | 3-5/8-16 |
| ADCQ | PLAIN HOLE DIAMETER | 3.281 INCHES NOMINAL |
| AGAV | END ITEM IDENTIFICATION | MRAP-COUGAR |
| FEAT | SPECIAL FEATURES | 3/64 IN. BY 45 DEG CHAMFER ON ID;R.H.THD;GRIPPING SURFACE CONDITION-PLAIN;MATL THK 0.092/0.096 IN.;SCREW THD SERIES DESIGNATOR-16N |
| MATT | MATERIAL | STEEL |
| STYL | STYLE DESIGNATOR | SCREW ON |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote