When you would like to secure affordable procurement options for Custom Electronics Inc part number CER1A795SP, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Custom Electronics Inc part number CER1A795SP for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5910-00-873-3738 Item PartTypeName: CAPACITOR,FIXED,MICA DIELECTRIC | 5910 | 008733738 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CER1A795SP | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAQL | BODY STYLE | W/MTG TABS/FLANGES,TERMINAL S ON ONE SURFACE |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABHP | UNABLE TO DECODE | UNABLE TO DECODE |
| ABJT | TERMINAL LENGTH | 12.000 INCHES MINIMUM |
| ABKW | UNABLE TO DECODE | UNABLE TO DECODE |
| ABMK | UNABLE TO DECODE | UNABLE TO DECODE |
| ADAQ | BODY LENGTH | 3.220 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 2.640 INCHES NOMINAL |
| ADAU | BODY HEIGHT | 1.500 INCHES NOMINAL |
| AEBP | CENTER TO CENTER DISTANCE BETWEEN TERMINALS PARALLEL TO LENGTH | 1.375 INCHES NOMINAL |
| AEBT | TERMINAL DIAMETER | 0.156 INCHES NOMINAL |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | 0.166 INCHES NOMINAL |
| AEBY | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 3.580 INCHES NOMINAL |
| AEBZ | SCHEMATIC DIAGRAM DESIGNATOR | ONE TERMINAL COMMON TO EACH SECTION |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 2.300 INCHES NOMINAL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | 4 UNTHREADED MOUNTING HOLES |
| BWGP | SECTION QUANTITY | 2 |
| CQBF | INSULATION RESISTANCE AT MAXIMUM OPERATING TEMP | 30.0 MEGOHMS |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.180 MICROFARADS 2ND SECTION |
| CQBQ | CAPACITANCE VALUE PER SECTION | 0.600 MICROFARADS 1ST SECTION AND 0.600 MICROFARADS 1ST SECTION0.180 MICROFARADS 2ND SECTION |
| CQJJ | NONDERATED OPERATING TEMP | 46.0 DEG CELSIUS MINIMUM AND 95.0 DEG CELSIUS MAXIMUM |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1500.0 DC 1ST SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 1500.0 DC 1ST SECTION AND 6000.0 DC 2ND SECTION |
| CQWM | NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION | 6000.0 DC 2ND SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | 10.00 TO 10.00 PERCENT 1ST SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | 10.00 TO 10.00 PERCENT 1ST SECTION AND-10.00 TO 10.00 PERCENT 2ND SECTION |
| CRTP | TOLERANCE RANGE PER SECTION | 10.00 TO 10.00 PERCENT 2ND SECTION |
| CWJK | CASE MATERIAL | PLASTIC |
| CWPK | INSULATION RESISTANCE AT REFERENCE TEMP | 12000.0 MEGOHMS |
| CWPM | DISSIPATION FACTOR AT REFERENCE TEMP IN PERCENT | 0.600 |
| CWSG | TERMINAL SURFACE TREATMENT | SOLDER |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 INSULATED WIRE LEAD |
 |
AS9120B and ISO 9001:2015 |
 |
Aviation Suppliers Association Member |
 |
FAA AC 0056B Accredited |
 |
AS 6081:2012 Certification |
 |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote
