When you would like to secure affordable procurement options for Caterpillar Inc part number 2D9600, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Caterpillar Inc part number 2D9600 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2530-00-084-7544 Item PartTypeName: CYLINDER ASSEMBLY,HYDRAULIC BRAK | 2530 | 000847544 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| FE14021 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | UNABLE TO DECODE | UNABLE TO DECODE |
| ABDR | MOUNTING PROVISION | UNTHREADED MOUNTING HOLES |
| ABKW | OVERALL HEIGHT | 4.910 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 2.500 INCHES NOMINAL |
| ABXV | UNABLE TO DECODE | UNABLE TO DECODE |
| AFLW | ACTUATION METHOD | DIRECT |
| AMQZ | COMPRESSED LENGTH | 7.860 INCHES NOMINAL |
| ATEM | EXTENDED LENGTH | 9.300 INCHES NOMINAL |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | TWO HOLE |
| BMWH | RESERVOIR TYPE | INTEGRAL |
| BYXG | STRAIGHT BORE INSIDE DIAMETER | 1.250 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | RUBBER BOOT |
| CKSG | FIRST PISTON ROD END THREAD SERIES DESIGNATOR | UNF |
| CKSH | FIRST PISTON ROD END THREAD DIAMETER | 0.438 INCHES NOMINAL |
| CKSJ | FIRST PISTON ROD END THREAD QUANTITY PER INCH | 20 |
| CKSK | FIRST PISTON ROD END THREAD CLASS | 2B |
| CKSL | FIRST PISTON ROD END THREAD DIRECTION | RIGHT-HAND |
| CLLN | UNABLE TO DECODE | UNABLE TO DECODE |
| CLLZ | UNABLE TO DECODE | UNABLE TO DECODE |
| CLML | MOUNTING TYPE AND LOCATION | BOSS CENTER SECTION |
| CLMQ | MOUNTING FACILITY DIAMETER | 0.391 INCHES NOMINAL |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | 4.120 INCHES NOMINAL |
| CLMS | PORT LOCATION AND QUANTITY | 1 CYLINDER HEAD END |
| CLMT | PORT STYLE | GASKET SEAL |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNF |
| CLMX | PORT THREAD DIAMETER | 0.500 INCHES NOMINAL |
| CLMY | PORT THREAD QUANTITY PER INCH | 20 |
| CLNB | PORT THREAD CLASS | 2B |
| FEAT | SPECIAL FEATURES | INTERNAL THD PISTON ROD END STYLE |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote