When you would like to secure affordable procurement options for Cantwell Cullen Hydraulic Division part number CCH11419, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Cantwell Cullen Hydraulic Division part number CCH11419 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-453-7345 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014537345 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CCH11419 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | Thread Class | 3B 2ND END |
| CRWL | Inside Surface Condition | SMOOTH |
| CQGM | Maximum Operating Pressure | 3100.0 POUNDS PER SQUARE INCH |
| AKUU | End Connection Design | ELBOW 2ND END |
| AAJF | Thread Direction | RIGHT-HAND 2ND END |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| THSD | Thread Series Designator | UN 2ND END |
| AAJD | Thread Class | 3B 1ST END |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| CRFY | Flow Angle | 90.0 DEGREES 2ND END |
| THSD | Thread Series Designator | UN 1ST END |
| CRXX | Measuring Method And Length | 36.000 INCHES NOMINAL OVERALL |
| AGAV | End Item Identification | 2320-01-442-1940 CAGE 45152 |
| AWLS | Connection Type | THREADED INTERNAL TUBE 2ND END |
| ABKV | Outside Diameter | 1.160 INCHES NOMINAL |
| MRC | Decoded Requirement | Clear Text Reply |
| MEDA | Media For Which Designed | AIR AND WATER AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AWLS | Connection Type | THREADED EXTERNAL BOSS 1ST END |
| AARX | Inside Diameter | 0.750 INCHES NOMINAL |
| AHNC | Connection Style | EXTERNAL SEAT FOR GASKET SEAL (BOSS) 1ST END |
| ACKH | Minimum Inside Bending Radius | 9.500 INCHES |
| CQRB | Seat Angle | 37.0 DEGREES 2ND END |
| AHNC | Connection Style | SWIVEL NUT FLARE 2ND END |
| CQCS | Layer Composition And Location | 2ND LAYER BRAIDED STEEL WIRE AND 3RD LAYER BRAIDED STEEL WIRE AND OUTER LAYER MOLDED RUBBER, SYNTHETIC |
| CQJX | Nominal Thread Size | 1.3125 INCHES 1ST END |
| ABJH | Temp Rating | -40.0 DEG FAHRENHEIT AND 212.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX | Nominal Thread Size | 1.3125 INCHES 2ND END |
| CMLP | Thread Quantity Per Inch | 12 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| CMLP | Thread Quantity Per Inch | 12 2ND END |
| CQBD | Burst Test Pressure | 12400.0 POUNDS PER SQUARE INCH |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote