Obtain a Quote for Calabrese And Sons Inc Part Number CS6727503 Now

Part Number:  CS6727503
Manufacturer:  Calabrese And Sons Inc
NIIN:  00-672-7503
Item Name :  bearing sleeve
CAGE Code:  07310
FSG:  31 Bearings
INC Code :  13205
Country:  USA
NCB Code:  00

When you would like to secure affordable procurement options for Calabrese And Sons Inc part number CS6727503, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Calabrese And Sons Inc part number CS6727503 for your comparisons.

Do You Have Specific Questions About Particular Needs?

If you are managing a project that involves an extensive part list, urgent delivery timelines, or other specialized fulfillment requirements, our specialists will be glad to discuss your needs together. By contacting us by phone or email, you can connect with an experienced representative who will review your specifications in detail and present tailored solutions that align with your project goals, so never hesitate to reach out.

Note : We Will Not Share Your Information To Any Third Parties.

Please fill out below form for CS6727503

Contact Information

“*” Required Fields Are Compulsory
   * By clicking this box, I acknowledge that I have read and accept the ASAP Semiconductor Terms and Conditions and agree that all quotes and purchase orders are exclusively subject to the ASAP Semiconductor Terms and Conditions.
  • I consent to receive email communications from ASAP Semiconductor and can unsubscribe at any time.
  • ASAP Semiconductor is a wholly independent aftermarket parts distributor.
  • This website is intended for quotations based on part numbers only. Please DO NOT submit drawings, technical data, or other specifications through this portal.

Disclaimer: This is a quotation for the goods listed above. This quotation is meant as an estimate and does not reflect a final bill or invoice. All quotations are subject to change until acceptance by ASAP Semiconductor of a binding Purchase Order, and quotations may be withdrawn or revised at the sole discretion of ASAP Semiconductor. This quotation is subject to the ASAP Semiconductor Terms & Conditions available at https://www.asapsemi.com/customer-terms-and-conditions/ . All United States Government and Department of Defense bids are quoted as CAGE code 6RE77 from ASAP Semiconductor’s Anaheim, California facility. Any quotation from ASAP Semiconductor without 6RE77 is void.


NSN Information for Part Number CS6727503 with NSN 3120-00-672-7503, 3120006727503

NSNFSCNIINCLSHazmatDEMILCancelled NSN
3120-00-672-7503

Item PartTypeName:

BEARING,SLEEVE

31200067275030N
CIICHCCESDPMICCriticalityENAC
UU
Part NumberISCRNVCRNCCHCCMSDSSADC
40789223

Characteristics Data of NSN 3120-00-672-7503, 3120006727503

MRCCriteriaCharacteristic
ABHPOVERALL LENGTH7.3750 INCHES NOMINAL
ADARBODY OUTSIDE DIAMETER3.4980 INCHES MINIMUM AND 3.5000 INCHES MAXIMUM
ADASBODY INSIDE DIAMETER2.7500 INCHES MINIMUM AND 2.7510 INCHES MAXIMUM
AGFFFLANGE WIDTH0.9688 INCHES NOMINAL
AGKHLUBRICANT ACCOMMODATION STYLEGROOVED OPEN BOTH ENDS
AJFMEND TO FLANGE DISTANCE3.1250 INCHES NOMINAL
BZLXCORNER SHAPESQUARE INSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE INSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE BODY CORNER
BZLXCORNER SHAPESQUARE LEFT FLANGE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE LEFT CORNER
BZLXCORNER SHAPESQUARE OUTSIDE RIGHT CORNER
BZLXCORNER SHAPESQUARE RIGHT FLANGE BODY CORNER
BZLXCORNER SHAPESQUARE RIGHT FLANGE OUTSIDE LEFT CORNER
CSYMSURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES LEFT END SURFACE OF FLANGE
CSYMSURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES OUTSIDE DIAMETER SURFACE OF FLANGE
CSYMSURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF BODY
CSYMSURFACE FINISH125.0 MICROINCHES RIGHT END SURFACE OF FLANGE
CSYMSURFACE FINISH63.0 MICROINCHES INSIDE DIAMETER SURFACE OF BODY
CTMQSURFACE GROOVE LOCATION AND QUANTITY1 INTERNAL
FEATSPECIAL FEATURES2.0312 IN. RADIUS OF FLANGE ON UPPER HALF OF BOTH SEGMENTS,1.8594 IN. RADIUS OF FLANGE ON LOWER HALF OF BOTH SEGMENTS,UPPER HALF OF CENTER FLANGE OUTSIDE LEFT CORNER UNDERCUT 0.1250 IN. W BY 0.1718 IN.,STYLE 69 INTERNAL GROOVE IN LOWER HALF
MATTMATERIALCOPPER ALLOY 937 OVERALL
STYLSTYLE DESIGNATORSEGMENTED,EXTERNAL FLANGE

ASAP Semiconductor’s Certifications and Memberships



manf_ OVER 75000
MANUFACTURERS
on_time_del Same-day
and next-day delivery
comp_purchasing COMPLETE PURCHASING
SOLUTIONS
certification_ FULLY CERTIFIED
MATERIAL
comp_prices COMPETITIVE
PRICES
Thank You for Visiting!

Before You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!

Request for Quote

We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.

bottom to top