When you would like to secure affordable procurement options for Boeing Company The part number 7M482, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Boeing Company The part number 7M482 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-482-5571 Item PartTypeName: HOSE ASSEMBLY,NONMETALLIC | 4720 | 014825571 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7M482 | 5 | 9 | D |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKV | Outside Diameter | 0.590 INCHES NOMINAL |
| CQCS | Layer Composition And Location | 1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE AND OUTER LAYER RUBBER IMPREGNATED BRAIDED FABRIC |
| CQRB | Seat Angle | 37.0 DEGREES 1ST END |
| CQGM | Maximum Operating Pressure | 125.0 POUNDS PER SQUARE INCH |
| AAJF | Thread Direction | RIGHT-HAND 1ST END |
| ADJS | Exterior Color | GREEN |
| MRC | Decoded Requirement | Clear Text Reply |
| ABJH | Temp Rating | -65.0 DEG FAHRENHEIT AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU | End Connection Design | STRAIGHT 1ST END |
| AAJD | Thread Class | 3B 1ST END |
| CRDW | Hydrostatic Test Pressure | 250.0 POUNDS PER SQUARE INCH |
| CRXX | Measuring Method And Length | 11.500 INCHES NOMINAL WORKING |
| ACKH | Minimum Inside Bending Radius | 0.870 INCHES |
| CQBD | Burst Test Pressure | 500.0 POUNDS PER SQUARE INCH |
| AARX | Inside Diameter | 0.375 INCHES NOMINAL |
| CRWL | Inside Surface Condition | SMOOTH |
| CQJX | Nominal Thread Size | 0.562 INCHES 1ST END |
| AWLS | Connection Type | THREADED INTERNAL TUBE 1ST END |
| AGAV | End Item Identification | F/A-18, HORNET |
| AHNC | Connection Style | SWIVEL NUT FLARE 1ST END |
| AAGR | Cross-Sectional Shape Style | ROUND |
| THSD | Thread Series Designator | UNJF 1ST END |
| FEAT | Special Features | HOSE ASSEMBLY INTERNAL SPRINGWIRE ENDS SHALL BE ATTACHED TO NIPPLE; ASSEMBLY IS RATED AT LOW PRESSURE; END FITTINGS TO MATE WITH SAE-AS4395 FOR TUBE SIZE SPECIFIED |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote