When you would like to secure affordable procurement options for Army United States Department Of part number 712209, do not hesitate to take advantage of the Request for Quote (RFQ) form on this page. As you complete this form, be sure to offer us important details like your target price and expected fulfillment timeframe, as well as information for contacting you with our response. Within 15 minutes of receiving and reviewing your submission, a member of our staff will reach out to you to present a tailored solution on Army United States Department Of part number 712209 for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-184-5420 Item PartTypeName: BEARING,ROLLER,NEEDLE | 3110 | 001845420 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 712209 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 3.7492 INCHES MINIMUM AND 3.7500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 4.6240 INCHES MINIMUM AND 4.6250 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 1.0490 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 1.5000 INCHES NOMINAL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGZA | ALIGNMENT TYPE | RIGID |
| FEAT | SPECIAL FEATURES | RETAINMENT PLATES HELD IN PLACE BY SNAP RINGS |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | CAM ROLLER,HARDENED AND GROUND,NON-SEPARABLE |
![]() |
AS9120B and ISO 9001:2015 |
![]() |
Aviation Suppliers Association Member |
![]() |
FAA AC 0056B Accredited |
![]() |
AS 6081:2012 Certification |
![]() |
ESD S20.20-2014 Certification |
OVER 75000
Same-day
COMPLETE PURCHASING
FULLY CERTIFIED
COMPETITIVEBefore You Go, Take a Look at Our NSN Parts Catalog! Don’t forget That We Can offer A Competitive Quote Within 15 Minutes of Receiving Your RFQ form!
Request for Quote